Interior radio button/doorbell 1 gear

For proper operation, it requires an AC 12-24V power supply. Output contact is only connected (activated) during contact on the glass surface. You can click and hold the button once, twice, or multiple times to assign various intelligent functions to your intelligent wiring system.

The potential free button is operated with a low voltage of 12-24V AC. The output is a switching contact of the relay and can switch signals up to max. 1000W/230V/5A, making it the universal switching element of your intelligent system.

Control the push button via remote control. The remote control is not included in delivery (please order via accessories below).

The touch point is illuminated at any time of day, so that the switch is easy to find in the dark and is also an eye-catcher.

The light switch can be used with all light sources, including incandescent lamps, halogen lamps & energy saving lamps.

Attention:

    For control via the app we recommend the SmartHome Box or the everHome CloudBox. Without these boxes the switches can only be operated by manual touch or remote control.

    For lamps with a power of 20 Watt or LED lamps a resistor adapter is necessary. You can find this under accessories (article number: W1).

Technical data:

    Dimensions: 71 x 71 x 34mm
    Supply voltage: AC12-24V
    max. current: 5A
    max. load: 1000W/channel
    quiescent power consumption: less than 0.1mW
    Attention: requires a neutral conductor
    Lifetime over 100.000 operations
    (this corresponds to a service life of 9 years if you operate the switch 30 times a day)

Translated with www.DeepL.com/Translator (free version)

Installation information: You will receive detailed installation instructions with the delivery. This is preliminary information only.

• All touch light switches are installed without power & glass or wooden screen! The bezel can be removed with a flat screwdriver. To do this, insert the screwdriver into the opening and gently turn it until it clicks.
• Then connect the light switch:
• Circuit diagramCircuit diagram LED
• Screw the light switch to the flush-mounted box.
• Now reattach the cover, there must be a "click" noise, then you can assume that the glass cover is seated correctly.
• Wait 6 minutes, then turn on the power.
• Then wait another 3 minutes, during which time the sensor adjusts itself.
• Now you can operate the light switch.

    If you do not follow these instructions, the light switch may not react or malfunctions may occur.