The light switch combines elegant design with state-of-the-art sensor technology. By lightly touching the switch surface, the light switch is activated and with the SmartHome variant everHome you have the possibility to control your lamps via SmartPhone-App.
The touch point is illuminated at any time of day, so that the switch is easy to find in the dark and is also an eye-catcher.
The light switch can be used with all light sources, including incandescent lamps, halogen lamps & energy saving lamps.
Attention:
For control via the app we recommend the SmartHome Box or the everHome CloudBox. Without these boxes the switches can only be operated by manual touch or remote control.
For lamps with a power of 20 Watt or LED lamps a resistor adapter is necessary. You can find this under accessories (article number: W1).
Technical data:
Dimensions 71 x 71 x 34mm
Operating voltage: AC110~250V, 50Hz60Hz
max. current for each gear 2.5A
max. power for each gear 500W/220V or 250W/120V
Quiescent current consumption: less than 0.1mW
Service life over 100,000 times
Installation information: You will receive detailed installation instructions with the delivery. This is preliminary information only.
- All touch light switches are installed without power & glass or wooden screen! The bezel can be removed with a flat screwdriver. To do this, insert the screwdriver into the opening and gently turn it until it clicks.
- Then connect the light switch:
- Circuit diagramCircuit diagram LED
- Screw the light switch to the flush-mounted box.
- Now reattach the cover, there must be a "click" noise, then you can assume that the glass cover is seated correctly.
- Wait 6 minutes, then turn on the power.
- Then wait another 3 minutes, during which time the sensor adjusts itself.
- Now you can operate the light switch.
If you do not follow these instructions, the light switch may not react or malfunctions may occur.
