Bluetooth speaker box for the wall, with glascover

The light switch combines elegant design with state-of-the-art sensor technology. The surface is made of safety glass. Below is an aluminium frame in black, with polished edges. The light switch is activated by lightly touching the switching surface. The touch point is illuminated at any time of day so that the switch is easy to find in the dark and is also an eye-catcher.

The light switch can be used with all light sources including incandescent lamps, halogen lamps & energy saving lamps.

Attention: For lamps with a wattage of 20 Watt or LED lamps a resistor adapter is necessary. You can find it under accessories (article number: W1).

Technical data:

• Color: white-chrome / black-chrome / black-black / gray
• Dimensions: 80 x 80 x 41mm
• Signal to noise ratio: more than 95 dB
• Operating humidity: 35% -85%
• Supporting device: Android / IOS
• Input voltage: 100 ~ 240V 50 / 60Hz / 0.3A
• Connection method: bluetooth 5.0
• Communication distance: 10m (barrier-free)
• Speaker specification: 33m 4Ω 3W
• Frequency response: 120Hz-18KHz

Installation information: You will receive detailed installation instructions with the delivery. This is preliminary information only.

• The installation takes place without electricity and glass cover. The cover can be removed with a flat screwdriver. To do this, insert the screwdriver into the opening and turn it carefully until it "clicks".
• Now connect the speaker:
• Bluetooth speaker wiring diagram Screw the loudspeaker to the flush-mounted box. Now reattach the cover, there must be a "click" sound, then you can assume that the glass cover is correctly seated.
• Wait 6 minutes, then turn on the power.
• Wait another 3 minutes, during this time the sensor adjusts itself.
• You can now operate the loudspeaker. If you do not follow the instructions, the light switch may not respond or malfunctions may occur.

If you do not follow these instructions, the light switch may not react or malfunctions may occur.